How to Connect the Freescale K70 Tower System to a Computer

o Carefully connect the mini-B male USB plug to the USB jack on the
  red, uppermost K70 processor PCB (printed circuit board).

o Connect the A male USB plug at the other end of that black USB cable
  to a USB jack on your computer.

o After successfully establishing the connection with an appropriate
  Windows OS driver, if you launch "Safely Remove Hardware and Eject
  Media," you should see "Eject OSBDM - Debug Port" in the list of
  hardware to possibly be ejected.  DO NOT EJECT ANY HARDWARE.

o Problem Sets 1 through 3 do *not* require use of the
  Tripp-Lite/Keyspan USB Serial Adapter or of the Adafruit 954 device.
  Neither device needs to be connected for these assignments.